Technicqll clear epoxy glue 2x12ml

Clear epoxy adhesive with very fast, few-minute curing time. Reliable and effective for permanent bonding of glass, porcelain, ceramics, plastics (except PP, PE, PTFE), stone, concrete, marble, metals and their alloys, rubber, wood. Excellent for bonding material combinations.
Key features:
– Solvent-free
– Fast curing time
– Dual-chamber syringe
– Clear
– Universal
– High electrical breakdown resistance
– Water and temperature resistant
– Resistant to aggressive chemicals (acids, alkalis, solvents, gasoline) and operational fluids
– Mechanically workable after drying (sanding, drilling, threading)
– Safe to use
– Repairs within minutes
– Precise component dosing, eliminates waste
– Creates invisible joints
– Bonds metals, ceramics, plastics
– For bonding electronic components
– Suitable for indoor and outdoor use
– Industrial applications
– Allows restoration of damaged threads and parts

Applications:
Clear epoxy adhesive is widely used in repairs requiring a clear, invisible joint/fill or where repair time should be within minutes. Due to high electrical breakdown resistance, it is used for bonding and potting electronic components to protect against moisture, dust, dirt, and other contaminants.
Used for bonding glass, wood, stones, plastics, rubber, metals, metal alloys, and combinations of these materials.

Most commonly used in:
– Jewelry (e.g., bonding amber with gold or silver)
– Electronics for bonding components
– Household emergency repairs

Specification:
Clear
Pot life after mixing: 1 min
Initial curing: 8 min (at 20°C)
Full curing: 12 h
Shear strength: 11.5 MPa
Temperature resistance: -30°C to 80°C
Shelf life: 36 months

Usage instructions:
Sand surfaces to be bonded with sandpaper or file.
Remove all dirt and degrease (use Cleaning Set P-102 or Technical Degreaser P-959).
Dispense appropriate amounts of components and mix thoroughly until uniform color is achieved.
Apply the prepared mixture to one surface.
Press elements firmly and leave immobilized until full curing of the adhesive.