Technicqll Aluminum Epoxy Paste 80g

Special two-component paste for use on aluminum alloys, cast iron, steel, and non-ferrous metals. Contains glass fibers increasing crack resistance. Ideal for repairing cracked cylinder heads and engine blocks, fuel tanks, radiators, oil pans. After curing, can be painted and mechanically processed (drilling, sanding, threading). Features: Solvent-free; easy to use; thixotropic consistency; contains reinforcing fibers; water and temperature resistant; allows regeneration of expensive parts; resistant to aggressive chemicals; safe to use; mix and apply; does not drip on vertical surfaces; reinforcement effect on joints; for indoor and outdoor use; cost-saving; industrial use. The Aluminum Paste is a two-component, thixotropic composite intended for repair and regeneration of parts made of light metal alloys, steel, cast steel, cast iron, and non-ferrous metals. After full curing, it can be mechanically processed. Resistant to weather, temperature, and aggressive chemicals. It is an alternative to costly repairs. Widely used in automotive workshops, industrial plants, and households. Typical applications: Repair and regeneration of cracked castings; filling gaps in light metal alloys; regeneration of worn shafts; removal of casting defects in cast iron, cast steel, and non-ferrous metal castings. Parameters: Color: silver-gray; Pot life after mixing: 30 minutes; Initial curing: 120 minutes (at 20°C); Full curing: 24 h; Shear strength: 11.0 MPa; Temperature range: -40°C to 1200°C; Shelf life: 36 months. Usage: For reinforcement, use Glass Mesh T-048. Sand repair surface with sandpaper or file. Remove all dirt and degrease (use Cleaning Set P-102 or Technical Degreaser P-959). Prepare mixing bowl. Apply equal volumes of components A + B using different spoons – if in doubt, use less hardener (component B). Mix thoroughly until uniform color and consistency without streaks or air bubbles. Apply mixture to repair area, filling gaps and recesses first. Repair within 30 minutes of mixing.