Single INVERTO Home Pro converter

Input frequency range: 10.7 GHz – 12.75 GHz Output frequency range: 950 MHz – 2150 MHz Low frequency LO: 9.75 GHz High frequency LO: 10.6 GHz Noise figure: 0.3 dB typical (0.7 dB max) LO frequency accuracy at 25 °C: max. +/- 500 kHz LO phase noise at 10 kHz: max. +/- 1.0 MHz Conversion gain: minimum 55 dB Ripple gain (above 26 MHz band): +/- 0.75 dB Gain variation (full range): +/- 4 dB Image rejection: minimum 40 dB Third-order intermodulation – ICP3: minimum 10 dBm 1 dB compression point (@ output): minimum 0 dBm Cross-polarization isolation: minimum 22 dB Control signal Ca (V): 11.0 V – 14.0 V Control signal Cb (H): 16.0 V – 20.0 V Control signal Cc (band switching): 22 kHz ± 4 kHz, 0.4 V ~ 0.8 V pp VSWR output: 2.5:1 Maximum apparent level in band: -60 dBm Current consumption: 95 mA Operating temperature: -30°C to +60°C Output impedance: 75 Ohm Output connector type: Type F (female) F/D Dish ratio: 0.6 Weight: 136 g