Power tool charger 17v/400ma

Charger dedicated to powering and charging power tool batteries. It allows direct charging of batteries or, when connected to a base/holder, powers the electronic charging circuit of the device. The charger is dedicated to NiMH, NiCd, Li-ion batteries. The battery model determines which battery it is dedicated to.
Specifications:
Input voltage: 230V AC (+/- 10%)
Current consumption: Rated power: 4; 6; 8 VA (*)
Thermal protection: 115°C
Output voltage: 5 – 21.5 V (*)
Battery charging current: Limited to 500mA (*)
Short circuit protection: YES
Reverse polarity protection: YES
Dimensions: 75mm x 90mm x 62mm
Weight: 0.35kg
Dedicated to batteries: 2-7Ah
Charging time for 7Ah battery: approx. 10h
Operation indicator: green LED
Charging indicator: red LED
* – depending on charger model (see table)

Battery voltage Charger voltage Max charging current Battery type
3.6 V 5 V 500mA Li-Ion
18 V 21.5 V 500mA Li-Ion
6 V 7.5 V 300mA NiMH; NiCd
6 V 7.5 V 500mA NiMH; NiCd
9.6 V 11.5 V 300mA NiMH; NiCd
12 V 14.4 V 300mA NiMH; NiCd
12 V 14.4 V 500mA NiMH; NiCd
14.4 V 17.0 V 400mA NiMH; NiCd
14.4 V 17.0 V 500mA NiMH; NiCd
18 V 21.5 V 300mA NiMH; NiCd
18 V 21.5 V 500mA NiMH; NiCd