Gas detector sensor XG20 230V

Gas sensor is a reliable device that helps protect you and your family from fire hazards. Equipped with an advanced gas detection system, the device provides early fault detection, enabling quick response. It is designed to monitor enclosed spaces for the presence of flammable gases: methane, ethane, propane, butane. Installation location selection To ensure maximum protection, it is recommended to install the device in all rooms and on every level of the residential building (both where devices or installations that may pose a fire hazard are located and in other rooms). When the alarm sounds: IMMEDIATELY LEAVE THE SMOKE-FILLED ROOM WHERE THE ALARM SOUNDED If possible, open windows and doors to ventilate the room Report the problem to specialized services (fire brigade, gas emergency) If you notice any symptoms of poisoning (e.g., headache) in yourself or any household member, contact a doctor immediately Light and sound signaling depending on device status Device activation and warming up: LEDs blink in green/red/yellow cycle | Single sound signal End of startup / Normal operation: Indicator lights green | No sound signal Alarm: Indicator flashes red (2.5 Hz) | Sound signal emitted Sensor fault: Indicator lights yellow | No sound signal Alarm – test: LEDs blink in green/red/yellow cycle | Sound signal emitted Product end of life: Indicator flashes yellow | Sound signal emitted once per minute Device lifespan The average lifespan of the electronic sensor device is up to 10 years. This depends on environmental conditions, production date, number of alarm activations, etc. It is recommended to regularly replace worn-out models with new ones. Specification: Power supply: AC 230V / 50 Hz Device type: B Standby power consumption: Alarm volume: > 70dB/1m Alarm output: relay (NC / NO) Control output: valve control output 12V Operating temperature range: -10°C ~ 50°C Operating humidity range: 10% ~ 90% R.H.