Flux tk83 100ml ag

Liquid, moderately active flux type 1.1.2/3 A according to ISO 9454-1, alcoholic rosin solution with organic activators, max soldering temperature 280°C. Solid content 24%. Perfect for manual tinning to restore solderability.

Physicochemical characteristics:
Appearance: dark amber liquid
Odor: alcoholic-resinous
Solubility in water: becomes cloudy, only carrier dissolves well, activator insoluble
Other solvents: most organic solvents
Static activity at 25°C: above melting point of Sn60Pb40 alloy 250 mm²
Halogen content: 0.06%
Non-volatile content: 24%
Density at 20°C: 0.86 g/cm³
Packaging: oil can 100ml

Usage:
Flux can be applied to printed circuit boards by foam method, wave soldering, dipping, or brush. Flux and its residues do not exhibit corrosive effects after soldering and therefore do not require removal. If removal is necessary, residues should be washed off with PCB alcohol cleaner, ethyl or isopropyl alcohol.