Carbon monoxide detector xc25 230v

WARNING!!! To maintain proper device operation, the device should be regularly tested at least once a week. DEVICE SERVICE LIFE
The average service life of the device (electronic sensor) is up to 2 years. This time depends strictly on environmental conditions in which the device operated, production date, number of alarm activations, etc. Regular replacement of worn models with new ones is REQUIRED.
SAFETY INSTRUCTIONS
To minimize the risk related to carbon monoxide (CO), it is necessary to have heating systems, ventilation systems, chimneys, and exhausts from fuel-powered devices checked regularly (at least once a year) by qualified specialists. All heating devices should always be installed according to the manufacturer’s recommendations and comply with local building regulations. All devices should be installed and checked by specialists after installation. Regularly inspect fuel supply or exhaust pipes for leaks, cracks, rust, etc. Also, pay attention to the flame color on burners (yellow or orange color may indicate incomplete fuel combustion). All household members must be thoroughly familiarized with the alarm devices used in the installation.
SYMPTOMS OF CARBON MONOXIDE (CO) POISONING
Carbon monoxide (CO) is a highly toxic, odorless, and colorless gas. It is produced by incomplete fuel combustion and is extremely dangerous to all living organisms. In case of exposure to carbon monoxide and symptoms of poisoning, seek medical help immediately.
– Mild exposure: slight headache, nausea, vomiting, fatigue (often described as “flu-like” symptoms).
– Moderate exposure: severe pulsating headache, drowsiness, confusion.
– Extreme exposure: loss of consciousness, seizures, heart failure, death.
These exposure levels refer to healthy adults. For children, elderly, or people with health problems, the risk is significantly higher.
DEVICE FEATURES
– High-efficiency sensor
– Automatic restart after alarm
– MCU processing applied
– Automatic device failure detection
– Possibility to connect external solenoid valve
– Output for external alarm and external siren
– Energy-saving function
– SMT
SPECIFICATION
– Power supply: 100~230V AC
– Power consumption: –
– Alarm level: 150ppm
– Alarm light signal: flashing red LED
– Alarm sound signal, volume: >70 dB
– Allowed ambient temperature: -10°C ~ 50°C
– Allowed ambient humidity: 20% ~ 90% R.H.
– Dimensions: 115 x 72 x 41 mm
– Cable length: approx. 130 cm