Bathroom scale LAFE FitScale White

Highly functional steam iron with 2200 W power. Thanks to a durable ceramic soleplate and relatively lightweight construction, it glides excellently over any fabric. Attractive appearance, solid build, rubberized handle, and rubber pads at the back are definite advantages. The iron is equipped with many useful functions.

Sprayer
The sprayer function can be used anytime regardless of other settings. Activated by a button near the handle. Multiple presses may be necessary for operation.

Steam Ironing
Set the steam amount switch appropriately (“Min” for least steam, “Max” for most). Steam output also depends on thermostat setting—lower temperature (one or two dots) produces less steam, higher (three dots) more.

Steam Boost
This function releases a one-time large steam burst (~80g) for better effect on hard-to-iron or heavily wrinkled fabrics. Works only on three-dot or “Max” settings. Pressing the button near the handle releases a strong steam jet from soleplate holes. Repeat after a few seconds if needed. Do not use more than three times in a row. Multiple presses may be needed to activate.

Vertical Steam Ironing
Uses steam boost function with the iron held vertically. Hold iron about 15-30 cm from fabric during use.

Anti-Calc Self-Cleaning System
The iron has a self-cleaning system preventing scale and mineral buildup. It limits scale formation during steam ironing but cannot completely stop natural scale deposits. Occasionally, small scale particles may come out of soleplate holes.

Self Cleaning System
Used to remove scale and mineral deposits inside the device. Recommended at least once a month, frequency depending on water hardness. Activated by Self Cleaning button.

Anti-Drip System
Prevents water dripping from the soleplate at low temperatures. Operates automatically and may produce hissing sounds during heating and cooling, which is normal.

Auto STOP System
Automatically switches off the iron left unattended while plugged in. Very sensitive; may activate during slow ironing. Move the iron dynamically to restart.

Auto STOP Horizontal Position
If left unattended horizontally, the iron switches off after about 30 seconds with a short beep.

Auto STOP Vertical Position
If left unattended vertically, the iron switches off after about 8 minutes with a short beep. To restart, move the iron dynamically. The cable has a ball joint to prevent tangling.