250 mm fur roller with handle

3,73 
Cover made of polyamide yarn Recommended for emulsion, acrylic, oil, and latex paints Handle with 6 mm steel wire

Professional English brush 4″

5,38 
Natural bristles Galvanized ferrule Handle made of wood composite 60% of bristles in the brush are equal to maximum length

Angle gauge with electronic readout

118,99 
Angle square with digital angle reading LCD screen Angle measurement from 0° to 180° Accuracy ± 0.1° Body made of anodized aluminum profile

Rollers with nylon handle 10 x 100 fi6, 2 pcs., proline

2,81 
7 mm short pile cover Resistant to solvents Recommended for painting with oil-based, nitro, chlorinated rubber, polyvinyl, anti-corrosive, primer, two-component paint

Handle 180 fi8 proline

2,29 
Lightweight plastic handle 8 mm diameter steel wire

Rex olive insert 70 x 250 fi8 proline

8,57 
Roller designed for economical painting of large surfaces with emulsion and latex paints 41156, 41157 – facade rollers padded with 6 mm thick PP foam covered with polya

Rex olive refill 70 x 180 fi8 proline

7,14 
Roller designed for economical painting of large surfaces with emulsion and latex paints 41156, 41157 – facade rollers padded with 6 mm thick PP foam covered with polya

Professional English brush, 2.5″, wooden handle, varnish, acrylic, proline

7,68 
Mixture of natural bristle and OREL® hair in 50%-50% ratio Wooden lacquered handle Brush intended for painting with water-based paints

38 mm combination wrench, DIN 3113, CV, Proline “HD”

33,62 
Forged Chromed Satin finish Meets dimensional requirements of German standard DIN3113 Strength parameters exceed by 60% the requirements specified in DIN899 and A

32 mm combination wrench, DIN 3113, CV, Proline “HD”

17,09 
Forged Chromed Satin finish Meets dimensional requirements of German standard DIN3113 Strength parameters exceed by 60% the requirements specified in DIN899 and A

30 mm combination wrench, DIN 3113, CV, Proline “HD”

16,59 
Forged Chromed Satin finish Meets dimensional requirements of German standard DIN3113 Strength parameters exceed by 60% the requirements specified in DIN899 and A

27 mm combination wrench, DIN 3113, CV, Proline “HD”

12,70 
Forged Chromed Satin finish Meets dimensional requirements of German standard DIN3113 Strength parameters exceed by 60% the requirements specified in DIN899 and A

22 mm ring spanner, DIN 3113, CV, Proline “HD”

10,02 
Forged Chromed Satin finish Meets dimensional requirements of German standard DIN3113 Strength parameters exceed by 60% the requirements specified in DIN899 and A

18 mm combination wrench, DIN 3113, CV, Proline “HD”

6,67 
Forged Chromed Satin finish Meets dimensional requirements of German standard DIN3113 Strength parameters exceed by 60% the requirements specified in DIN899 and A

16mm combination wrench, DIN 3113, CV, Proline “HD”

5,83 
Forged Chromed Satin finish Meets dimensional requirements of German standard DIN3113 Strength parameters exceed by 60% the requirements specified in DIN899 and A

8mm ring spanner, DIN 3113, CV, Proline “HD”

3,74 
Forged Chromed Satin finish Meets dimensional requirements of German standard DIN3113 Strength parameters exceed by 60% the requirements specified in DIN899 and A

60m tape measure, fiberglass tape, open end, class III accuracy

34,93 
ABS housing with elastomer-coated handle Tape contains 26 embedded reinforcing fibers Quick rewind Foldable crank Convenient end hook White tape with 2 mm gradu