Jump Starter Compressor 5 in 1

The power amplifier is designed as a compact, durable, and portable quick-start system for vehicles. This device can start most vehicles. It can also be used as a portable 12V DC power source in remote locations and emergencies. The power amplifier has an easy-to-read, color-coded battery status indicator showing the charge level. The 12V socket is intended for use with devices that operate a car cigarette lighter. For maximum convenience, the power amplifier can be charged using a separately supplied mains charger. A red LED lights during charging.
Functions of the starter device:
Start – allows immediate vehicle start. Simply connect the device to the battery and turn the key.
Charger – allows charging a 12V car battery.
Compressor – enables inflating tires, bicycle tubes, balls, and many other items.
Powerbank – with the installed USB port, the device can be used as a portable power bank. Charge your phone, camera, tablet, console, or other devices.
LED light – useful both outdoors and during car repairs anywhere.
Key features:
Peak power 900 A / starting power 400 A.
Starts cars, trucks, boats without needing a host vehicle or power cables.
12V cigarette lighter socket with overload protection powers devices usually connected to a 12V car lighter socket.
Provides up to 50 hours of DC power when using the 12V socket.
Allows use in remote locations and emergencies without mains power.
Can be stored without acid leakage risk.
Battery condition has color codes and is easy to read.
Durable, impact-resistant housing.
Built-in lamp for emergency use away from power sources.
Jump Starter with compressor
The charger includes a compressor for emergency inflation of, e.g., car tires. The inflation hose is stored in a special locked compartment at the back of the device, preventing interference during other functions.
LED lamp – Night operation
The Jump Starter features a powerful flashlight with fifteen LED diodes. The lamp, located at the compressor front, is perfect for inflating tires in the dark, allowing easy connection of the pressure nozzle to the valve.
Front panel functions:
Safety switch
Emergency light
USB button
Polarity
USB port
DC charging LED and charging plug socket
Voltage indicator
12V output socket with overload protection
Test button
Emergency light switch
Air compressor switch
Pressure gauge
Start button
To achieve performance when using the device, follow these step-by-step instructions:
Connect the red (+) clamp to the red (+) positive battery or vehicle terminal.
Connect the black (-) clamp to a stationary metal part of the engine.
Wait 2-3 minutes.
Turn the vehicle ignition to “start” for no longer than 5 to 6 seconds.
If the engine does not start, wait at least 3 minutes before retrying.
Never allow the red and black clamps to touch each other or a common conductor.
When the engine runs, first disconnect the black (-) clamp.
Disconnect the red (+) clamp.
As soon as possible, connect the device to the mains charger.
Compressor operation
Warning: The compressor can be used continuously for only 10 minutes. Then allow 10 minutes to cool before reuse.
Ensure the main power switch on the front panel is in the “ON” position.
Use the universal adapter attached to the air hose for inflating tires.
Check the pressure gauge and set the desired pressure.
Turn on the device.
After reaching the desired pressure, turn off the compressor.
Remove the adapter from the tire or other inflated object.
Specifications:
DC output sockets: 12V + USB 5V
Starting current: 400A
Peak current: 900A
Battery: DC 12V, 20000mAh
Lighting: 15x LED
Maximum compressor pressure: 300 PSI / 20 BAR
Overload fuse: YES
Weight: 7.5 kg
Set includes:
Jump Starter with compressor
220 V mains charger
12 V DC-AC power cable (cigarette lighter)
Compressor adapters
User manual