Technicqll metal epoxy glue 2x20ml

Technicqll Metal Epoxy Adhesive 2x20ml
Composite of epoxy resins and metal powders, widely used for repairing worn metal parts, alloys, and castings due to corrosion, friction, breakage, cracks, cavitation. Features very high adhesion and excellent cooperation with metal parts under various temperature conditions. Contains metal fillers ensuring high thermal conductivity and reducing joint expansion. Known as “liquid metal.” Also bonds stone, glass, wood, most plastics (except PE, PP, PTFE, and silicone rubber). Excellent for bonding material combinations such as concrete – iron, hard rubber – cast iron. Protects against corrosion.
Typical applications include:
Repairing metal parts, filling defects and welded joints
Sealing cast iron, steel, and non-ferrous metal castings
Fixing leaks in central heating, water, and sewage installations
Rebuilding worn bearing seats, splines, threads, and guides
Embedding metal parts in concrete
Sealing fuel tanks, heat exchangers (e.g., radiators), oil pans, engine blocks
Key features:
Solvent-free
Contains powdered light metal alloys
Universal
Water and temperature resistant
Resistant to aggressive chemicals
Gray color
After curing, can be machined (sanding, drilling, threading)
Benefits:
Safe to use
Excellent thermal conductivity
Bonds metals, ceramics, plastics
For indoor and outdoor use
Industrial applications
Ideal for metal parts
Allows restoration of damaged threads and parts
Specifications:
Color: gray
Pot life after mixing: 30 minutes
Initial curing: 135 minutes (at 20°C)
Full curing: 24 hours
Shear strength: 12.0 MPa
Temperature range: -30°C to 90°C
Shelf life: 36 months
Usage instructions:
Clean and roughen bonding surfaces mechanically (sandblasting, sanding, sandpaper, file).
Remove all dirt and degrease (use Cleaning Set P-102 or Technical Degreaser P-959).
Squeeze appropriate amounts of components “A” and “B” in 1:1 volume ratio and mix thoroughly until uniform color.
Apply prepared mixture to one surface.
Press parts firmly and leave immobilized until full curing.