Flux tk83 for smd 50ml ag

Liquid, moderately active flux type 1.1.2/3 A according to ISO 9454-1, an alcoholic rosin solution with added organic activators, max. soldering temperature 280°C. Content of solids 24%. Perfectly suited for manual soldering to restore solderability.

Physicochemical characteristics:
– Appearance: dark amber liquid
– Odor: alcoholic-resinous
– Solubility in water: becomes cloudy, only the carrier dissolves well, activator insoluble
– Other solvents: most organic solvents
– Activity by static method at 250°C: spreading area of Sn60Pb40 alloy 250 mm²
– Halogen content: 0.06%
– Non-volatile substances content: 24%
– Density at 20°C: 0.86 g/cm³
– Packaging: 50 ml oil can

Usage:
Flux can be applied to printed circuit boards by foam method, flux wave, dipping, or brush. Flux and its residues do not exhibit corrosive effects after soldering and therefore do not require removal. If removal is necessary, residues should be washed off with PCB alcohol cleaner, ethyl alcohol, or isopropyl alcohol.