Power filter 1.5m m9 black

Device M9 features: 9 sockets with protective contact (10A/250V) Safe, non-conductive, self-extinguishing housing Operation indicator Easy mounting to surface Two-stage protection system Surge protection system: reliability ensured by a varistor with a fast response time below 25 nanoseconds and a high absorbed impulse value of 6000A, providing effective surge protection. Short-circuit protection system: consists of a delayed-action automatic fuse that does not require replacement. WARNING: If there is no voltage in the filter sockets, check the fuse button (red under the switch). If necessary, press after 30 seconds. Do not block the fuse button. Use the device only in installations with protective contact. Complete disconnection of the power strip occurs after unplugging from the mains socket. Do not use damaged products. Protect from water and moisture. Do not use for powering heaters, vacuum cleaners, refrigerators, and similar devices. For indoor use only. The maximum current load of all connected devices must not exceed 10A (2300W). Specification: Rated voltage: ~230 V, 50Hz Maximum load: 10A (2300 W) Switch: illuminated double-pole Fuse: delayed-action automatic 10A / 240V Leakage current: Energy absorption: 155 J Response time: Continuous operating voltage Uc: ~250 V, 50Hz Voltage protection level Up: ≤ 1.2kV Maximum discharge current: 6000A (L/N) – 8/20 µs Test voltage Uoc: 4kV