Tubeless tire repair kit amio-

TIRE REPAIR KIT QUICK TIRE WHEEL REPAIR

Perfect as a spare tire replacement. Ideal car equipment. Suitable for tubeless tires. The repair kit allows you to fix punctures quickly and effectively. Its small size makes it very handy, so you can always have it at hand. You never know what might happen on the road, so it’s worth having our kit!
IN THE SET:
Drill with handle
Awl with handle
5 vulcanizing cords, each 10 cm long
Glue 12g
The kit enables quick repair of a punctured tire. Perfect for field use when tire replacement is impossible.
Note that this is a temporary solution allowing you to reach your destination or the nearest vulcanizer.
Not suitable for cut tires or sidewall punctures, only for tread areas.
Instructions:
1. Remove the nail from the puncture.
2. Coat the reamer with the included glue and insert it into the hole left by the nail at the same angle to fill the hole with glue.
3. Thread the cord onto the awl and fold it in half, ends up.
4. Coat the cord with glue and press the awl with the cord into the puncture at the same angle as the previous penetration. Push firmly through the damaged area. Ensure the cord passes through the entire tire layer. Avoid pulling the entire cord inside. Two ends should protrude about 0.5–1 cm above the tire tread.
5. Pull the awl out decisively (do not twist it inside the tire during removal to avoid breaking).
6. Cut the two protruding cord ends leaving 5 mm above the tire. During driving, the cord will level with the tread surface.